Exakta RTL 1000 - Page 10

2. Place the cassette containing the unex-
posed film in the cassette chamber (28).
Push
th~ knob of the rewind crank (14)
backwards, twisting it gently; the carrier
of the rewind arbor (27) must engage with
the cassette -core.
3. Pull the beginning of the film (29) as far
as the green mark (35), and push it with its
(lower) perforation from above under the
film rest (33) and, accordingly, over the
film-wind sprocket (32). The catch bow of
the take-up spool (34) must not stand up-
wards!