Exakta RTL 1000 - Preparations for Use

Preparations for use
The Finder Hood (11) is opened by pressing on
the knob (24). To close the hood. press the cover
of the Finder Hood (26) backwards until it locks
in
position . The Jocusing magnifier (25) can be
swung either forward into the position of rest in
the cover of the Finder Hood (26) or backwards
into the working position. For further information
on the use of the Fi nder Hood see page 22.
Swing the release lock (4) to the stop on the
right (marking dots are staggered): the shutter
can be released by pressing on the right-hand
release (5). When you have finished taking pictu-
res. swing the release lock (4) to the stop on the left
(the marking dots are opposite each other) : now
it will be impossible to release the shutter. which
means protection against unintentional exposures.
(No locking in case of the left-hand release (16),)