Exakta RTL 1000 User Manual

The lens is focused by turning the distance - setting
ring (21) and by checking the definition of the
imoge in the viewfinder system . After focusing, the
correct camero-subject distance will be in line
with the orange-coloured triangle. The lower values
on the distance scale indicate metres, whilst the
larger values possibly arranged above !hem repre-
sent feet. All distance are measured from the back
of the camera to the subject.
Focusing for infra-red photography: When u~ing
infra-red film, first focus the image in the vIew-
finder system normally, then note the distance
indicated by the orange-coloured triangle (either
in feet or in metres or the infinity symbol), and
turn the focusing ring to set this distance against
the orange-coloured dot, the so-called infra-red
setting mark which is to the right of the normal
setting mark. By doing this. the image produced by
the infra-red rays will be brought into sharp focus
in the film plane of the ca mera and conseque ntl y
will appear sharp in the negative.
7 10 15 3{
2 3 5 11
8'4.4'8 '
T· ......
16 11 8 5.6 4

Exakta RTL 1000 Specifications

General

Brand	Exakta
Model	RTL 1000
Category	Digital Camera
Language	English