Need help?Do you have a question about the Excalibur AL-2075-3DB-L and is the answer not in the manual?
General| Number of Buttons | 5 |
|---|---|
| Alarm Type | Audible and Visual |
| Remote Control Range | Up to 3000 feet |
| Engine Immobilizer | Yes |
| Starter Kill | Yes |
| Door Lock Output | Yes |
| Compatibility | Universal |
| Power Supply | 12V DC |
| System Type | 2-Way |
| Remote Control | LCD Remote |
| Operating Temperature | -40°F to 185°F |
Details the 2-way and 1-way controllers and their functions.
Explains the meaning and use of status lights on the antenna.
Describes the push button for programming and valet functions.
Details the use of parking lights for visual confirmation of operations.
Explains siren and horn sounds for operations and violations.
Details the components and features of the 2-way controller.
Explains the elements displayed on the controller's screen.
Describes the basic 1-way transmitter and its battery replacement.
Explains how to lock and arm the vehicle system using the button.
Details how to unlock and disarm the vehicle system.
Describes using the TRUNK button for release or channel 2.
Explains the procedure to activate the remote start feature.
Details how to activate channel 3 using button sequences.
Details how to activate channel 4 using button sequences.
Details how to activate channel 5 using button sequences.
Describes the procedure to enter and exit valet mode.
Explains how to activate the panic function on the controller.
Describes how to arm or disarm the system without audible chirps.
Explains how to lock doors without activating the alarm.
Describes how to bypass sensors during the arming process.
Explains automatic starting based on voltage or temperature.
Describes how to request the vehicle's interior temperature.
Explains how to request the latest system status updates.
Details the use of auxiliary functions for vehicle features.
Explains automatic starting based on low voltage or temperature thresholds.
Describes the turbo timer feature for turbocharged engines.
Explains the pit-stop feature for quick errands with the engine running.
Details methods for remote starting manual transmission vehicles.
Describes arming the system after the last door is closed.
Explains how the system rearms automatically if disarmed.
Explains the impact sensor's pre-warning detection for light impacts.
Details system response, siren, and light flashes when triggered.
Explains how to perform an emergency override to disarm the system.
Describes how to enter and exit the system's valet mode.
Explains status light indications for security system states.
Describes transmitter verification via status light flashes.
Explains how status light indicates which zones were violated.
Details status light indications for remote start operations.
Explains status light codes for remote start diagnostic events.
Explains controller operation for multiple vehicles.
Details how to program vehicle image and name for profiles.
Describes how to select vehicle profiles for daily use.
Explains how to lock and unlock controller buttons.
Details how to set the alarm clock on the controller.
Describes how to set the controller's system clock.
Explains how to enable power save mode to conserve battery.
Details how to adjust screen lighting duration.
Explains how to turn button beep feedback on or off.
Describes how to select melodies for remote start notifications.
Explains how to choose temperature units (Fahrenheit or Celsius).
Details how to access the controller demonstration mode.
Explains how to select alert modes (melody, vibrate, or both).
Describes the functionality of parking and remote start timers.
Explains the anti-carjacking feature activated by ignition.
Explains the anti-carjacking feature activated by door opening.
Details the process for programming additional or replacement transmitters.
Steps to access user or installer features via valet switch.
Procedure for selecting features and changing their values.
Sets the maximum engine run time for remote start.
Configures parking light confirmation behavior for functions.
Allows selection of confirmation chirp volume levels.
Changes audible output for triggered alarms via brown wire.
Controls door lock/unlock operations based on ignition status.
Bypasses door lock/unlock if a door is open during ignition change.
Links trunk release to system unlock/disarm.
Changes how the remote start feature is activated from the remote.
Configures automatic arming after exiting the vehicle.
Enables and configures automatic rearming of the system.
Selects siren and/or horn for confirmation chirps.
Selects between ignition, door, or both anti-carjacking types.
Allows programming a custom SecureCode for overrides.
Allows overriding the alarm by turning the ignition on.
Sets the duration of alarm siren and light activation.
Configures the delay before the alarm monitors trigger zones.
Provides a warning if doors are open during system arming.
Changes remote start activation via wire input.
Enables vehicle learning for system setting configuration.
Selects the method for monitoring engine run condition.
Adjusts system timing for gasoline or diesel engines.
Programs the function of the system's light relay.
Determines the function of the blue satellite port wire.
Sets the starter cranking time for engine ignition.
Configures door lock/unlock output timings for vehicle compatibility.
Manages lock control related to remote start operations.
Configures the run times for the turbo timer feature.
Enables reservation mode for manual transmission vehicles.
Selects the data protocol for connected accessories.
Converts keyless entry models to full alarm systems.
Pulses ignition to activate immobilizer bypass modules for disarming.
Locks doors when the prewarn zone is triggered.
Configures starter interrupt operation based on alarm or remote start.
Adds extra crank time for the engine at low temperatures.
Programs outputs for arming, disarming, or additional channels.
Programs the function of the system's horn relay.
Reduces current draw for battery conservation.
To Next Page
