Do you have a question about the Excalibur 500 and is the answer not in the manual?
Number of Buttons on Remotes | 5 |
---|---|
Number of Remotes Included | 2 |
Alarm Type | Audible and Visual |
Remote Control | Yes |
Shock Sensor | Yes |
Starter Kill | Yes |
Door Lock Control | Yes |
Trunk Release | Yes |
Panic Mode | Yes |
Valet Mode | Yes |
Battery Backup | Yes |
System Type | 2-Way |
Press & Release the "Lock" button to arm the system.
Press & Release the Small "3rd" button Twice in 3 sec for silent arming.
Press & Release the "Unlock" button to disarm the system.
Press & Release the Small "3rd" button Twice in 3 sec for silent disarming.
Arming the system using the "Lock" button on the remote control.
Arming the system silently using the "3rd" button twice.
Automatic arming when ignition is off and doors are closed.
Disarming the system using the "Unlock" button on the remote control.
Disarming the system silently using the "3rd" button twice.
Allows the alarm to rearm itself if disarmed and no door is opened.
Configures automatic arming 30 seconds after last door closure.
Adds automatic door locking to the last door arming feature.
Sets alarm to give 2 unlock pulses upon disarm for certain vehicles.
Starter interrupt remains engaged after disarm until ignition is on.
Configures horn output to work with siren or replace it.
Temporarily turns off shock sensor if triggered multiple times.
Turns off 3-chirp warning for dome-light delay when arming.
Turns the ignition activated anti-carjacking feature on or off.
Turns remote and door activated anti-carjacking features on or off.
Configures wire to operate dome-light or window roll-up.
Configures pink wire to operate accessory or window roll-up.
Configures door lock/unlock based on ignition status.
Wiring diagram for negative trigger door locking systems.
Wiring diagram for positive trigger door locking systems.
Wiring for 5-wire reversal door lock systems.