ExcelTek RC-07 - User Manual

To Next Page

SKU RC-07

Programming Instructions

Before you program your ExcelTek remote please be advised of the followings:

• More than 1 garage door to program

Be sure to know which garage door you’re planning programming on which button

before you start because once programmed you won’t be able to change it unless

you erase all frequencies previously programmed with your garage door opener.

For example, you have the ExcelTek remote button A programmed with garage door

#1 and button B programmed with garage door #2 and you changed your mind. You

now want to do the opposite. When you’re gonna have the garage door #2

programmed on button A or garage door #1 programmed on button B both garage

doors A and B will open at the same time.

• Up to 3 frequencies can be programmed

For model RC-07, button C and D are linked together making the remote three

buttons.

Need help?

Do you have a question about the ExcelTek RC-07 and is the answer not in the manual?

Summary

Guidance on programming multiple garage doors and potential outcomes.

Step-by-step instructions for programming the remote to your garage door opener.

Crucial information that the remote only works with openers featuring a green learn button.

Addresses problems where the remote fails to synchronize with the garage door opener.

Discusses potential causes and solutions for poor remote signal reception.

Details the specific battery type (27A 12V) and the procedure for replacing it.

Emphasizes verifying the garage door opener's green learn button before purchase.

Highlights that buttons C and D are linked and dip switches are incompatible.

General