ExcelTek RC-15 - User Manual

To Next Page

SKU RC-15

Programming Instructions

Before you program your ExcelTek remote please be advised of the followings:

• More than 1 garage door to program

Be sure to know which garage door you’re planning programming on which button

before you start because once programmed you won’t be able to change it unless

you erase all frequencies previously programmed with your garage door opener.

For example, you have the ExcelTek remote button A programmed with garage door

#1 and button B programmed with garage door #2 and you changed your mind. You

now want to do the opposite. When you’re gonna have the garage door #2

programmed on button A or garage door #1 programmed on button B both garage

doors A and B will open at the same time.

• Up to 3 frequencies can be programmed

For model RC-15, button C and D are linked together making the remote three

buttons.

Need help?

Do you have a question about the ExcelTek RC-15 and is the answer not in the manual?

Summary

Step-by-step guide detailing how to program the ExcelTek remote control.

Specifies that the remote is only compatible with garage door openers featuring a yellow learn button.

Addresses problems where the remote is not synchronizing with the garage door opener.

Covers low battery voltage, garage opener memory capacity, and weak signal range troubleshooting.

Provides detailed instructions and visuals for replacing the battery in the ExcelTek remote.

Highlights that buttons C and D are linked, and the remote is not compatible with dip switches.

General