Do you have a question about the Executive Audio ALPHA Series and is the answer not in the manual?
Weight | 12kg |
---|---|
Channels | 2 |
Frequency Response | 20Hz - 20kHz ±0.5dB |
Input Impedance | 47kΩ |
Power Supply | AC 120V/60Hz or 230V/50Hz |
Highlights key features of the professional power amplifiers.
Important safety precautions to follow before installing and operating the amplifier.
Details the controls and LED indicators found on the amplifier's front panel.
Information on the removable ventilation slot panel for cleaning.
Describes the 75Hz-24Db/Oct Low cut function, which is optional.
Explains how to select between Stereo, Bridge, or Parallel operating modes.
Details how to select input sensitivity (0.775V, 1.0V, or 1.44V).
Explains how to use the Ground/Lift switch to eliminate hum noises from ground loops.
Details XLR, Phone, and Speakon connectors for input and output.
Explains unbalanced signal input using a 1/4 inch mono jack for CHA and CHB.
Details XLR female connectors for input and daisy-chaining signals between amplifiers.
Describes using Speakon connectors for signal output in Stereo mode for CHA and CHB.
Details Speakon connector usage for signal output in Bridge mode.
Explains Speakon connector usage for signal output in Parallel mode.
Provides a step-by-step guide for general amplifier operation procedures.
Details specific operation steps for Stereo, Bridge, and Parallel modes.
Guidelines for cleaning the unit and ventilation slots to maintain performance.
Lists common problems, their causes, and suggested remedies.
Technical specifications for ALPHA series amplifier models.