Exerpeutic 900XL User Manual

OWNER’S MANUAL
1111.9-100118
RECUMBENT BIKE
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference. The specifications of this product may vary from
this photo and, subject to change without notice.

Exerpeutic 900XL Specifications

General

Brand	Exerpeutic
Model	900XL
Category	Exercise Bike
Language	English

Summary

Service and Support

Important Safety Guidelines

Assembly Instructions

Step 1: Install Rear Main Frame

Connect and attach the rear main frame to the front main frame, including hand pulse sensor wires.

Step 2: Install Stabilizers

Attach the front and rear stabilizers to the main frames using bolts, washers, and cap nuts.

Step 3: Connect Console Wires and Install Tension Control Knob

Connect console wires, insert tension cable, and attach the tension control knob to the front handlebar post.

Step 4: Install Foot Pedals

Install the left and right foot pedals onto the respective cranks, ensuring correct tightening direction.

Step 5: Install Handlebar and Seat Sliding Tube

Attach the handlebar and seat sliding tube to the back and seat support bracket, connecting hand pulse sensor wires.

Step 6: Install the Console

Connect extension wires to the console and attach the console to the front handlebar post.

Step 7: Install Seat and Back Cushion

Attach the seat and back cushions to the back and seat support bracket using bolts and washers.

Console Operation

Console Button Functions

Console Computer Functions

Console Battery Installation

Adjustments and Leveling

Adjusting Tension Control Knob

Adjusting Seat Position

Troubleshooting and Maintenance

Troubleshooting Common Problems

Manufacturer's Limited Warranty

Warranty Component Lengths

Warranty Exclusions

Ordering Replacement Parts