Exibel X40 - Care and Maintenance; Setting the Sleep Timer; Headphone Socket; Factory Reset

10
English
Setting the SLEEP timer
Note: The sleep timer feature will only function when driven by the adaptor.
Thesleep function allows you to programme theradio to switch itself off after aperiod
of 10, 20, 30, 60, 70, 80 or 90 minutes.
Press [ SLEEP ] to browse; theselection will be confirmed automatically after 3 seconds.
When thesleep function is activated theword “SLEEP” will appear on thedisplay.
Backlight
Thestrength of thedisplay backlight can be set.
1. Press [ SNOOZE/DIMMER ] therequired number of times to set thestrength.
2. Available strengths: Low, medium, high or off.
Headphone socket
Headphones can be plugged into the3.5 mm socket on theback of theradio.
Factory reset
1. Press [ MENU ] and then turn [ VOLUME/SELECT ] to come to System.
Press [ TUNE/ENTER ] to confirm.
2. “Factory reset?” will appear on thedisplay. Turn [ VOLUME/SELECT ] and select Yes.
3. Press [ TUNE/ENTER ] to begin thefactory reset. “Restarting” will show on thedisplay.
4. Once thefactory reset is complete, theradio will start scanning for DAB stations
automatically.
Software
1. Press [ MENU ] and then turn [ VOLUME/SELECT ] to come to System.
Press [ TUNE/ENTER ] to confirm.
2. Turn [ VOLUME/SELECT ], select SWversion and then press [ TUNE/ENTER ]
to confirm.
3. Thecurrent software version is displayed.
Care and maintenance
Clean theproduct using asoft, dry cloth.
Never use solvents or abrasive cleaning agents.