Preface
This document is valid for the Harmony series EV Charger only.
The images used in this document are for illustration and instruction purposes only. The images and
descriptions in this document refer to a representative device design. The devices used by the user may
differ in their appearance and design.
We recommend that the charging station is always kept updated with the latest version of the software (as
per the latest release by the manufacturer), as this will ensure functional enhancements and product
improvements from time to time.
Purpose of this Guide
The document describes the troubleshooting of Harmony series EV Charger.
*Note: This document includes the latest information available at the time of printing. Exicom Tele-
Systems Ltd. reserves the right to make changes to this manual or product without further notice.
Changes, modifications, or repairs to this product by parties other than an authorized service provider
could void the product warranty.
Introduction to charger
Harmony – Fast charger solution is Exicom’s most innovative design till date and a true representation of
interoperability. The system has three connectors - CCS, CHAdeMO & AC TYPE 2: 142kW (DC: 120kW + AC:
22kW).
All guns can be used in Parallel for charging. The charger is equipped with multiple components as shown
below:
Troubleshooting Guide - Harmony series EV Charger
To Next Page
General