What to do if Exide Inverterz GQP 12V 7009VA shows overload and has no output voltage?
If your Exide UPS indicates an overload and there's no output voltage, it means that you've applied too much load. To fix this, reduce the amount of load on the Exide Inverterz and then reset it using the ON/OFF switch.
Why is my Exide Inverterz GQP 12V 7009VA not charging even when the mains are ON?
If the mains are ON, but your Exide UPS isn't charging, first check the LCD display for the mains voltage. Then, ensure that the Normal/UPS selection switch is set according to the specified voltage range. The issue might be that the UPS/Normal Selection switch is in UPS mode.
How to fix Exide Inverterz GQP 12V 7009VA UPS with no output voltage and no display?
If your Exide UPS has no output voltage and the display is off, it might be due to a poor battery condition or a loose battery connection. Try using a new battery or ensuring that the battery connections are properly secured.
General| Capacity | 700 VA |
|---|---|
| Voltage | 12V |
| Battery Type | Lead Acid |
| Usage | Home, Office |
| Brand | Exide |
To Next Page