Need help?Do you have a question about the Exide powerware plus and is the answer not in the manual?
Key capabilities and benefits of the Powerware Plus 12 UPS.
Explanation of how the UPS operates during normal and power failure conditions.
Guidelines for determining the total load requirements for UPS protection.
Table showing battery backup duration based on load and UPS configuration.
Explanation of common symbols used on the UPS and in the manual.
Description of front panel buttons and status indicator lights.
Instructions for navigating and interacting with the UPS display interface.
Overview of the primary menu items for monitoring and system setup.
Detailed configuration settings accessible through the System Setup menu.
Explanation of how front panel indicators behave in different UPS states.
Detailed descriptions of Normal, On-Battery, Bypass, and other operational states.
Procedure for the first-time power-up and initial configuration of the UPS.
Steps to start the UPS system with bypass enabled or disabled.
Procedures for safely powering down the UPS system.
Using an ANSI terminal for UPS monitoring and control.
Generating hard copies of UPS alarm messages.
Interfacing with the UPS via ASCII or Binary computer protocols.
Information and procedures for contacting technical support and service.
Detailed electrical and performance ratings of the UPS models.
Dimensions, weight, and environmental operating parameters.
Information regarding battery voltage, current, type, and expected life.
Guidelines for receiving and checking the UPS and its components.
Requirements for the installation environment and location.
Critical safety precautions to follow during installation.
Step-by-step instructions for physically setting up the UPS and battery units.
Procedures for wiring the UPS according to electrical codes and standards.
Steps to configure bypass and input settings after installation.
Instructions for installing the optional PDM unit.
Procedures for connecting and configuring external battery systems.
General| Output Voltage | 230VAC |
|---|---|
| Input Voltage | 230V |
| Frequency Range | 50/60Hz |
| Transfer Time | Typically <10ms |
| Operating Temperature | 0°C to 40°C |
| Dimensions (W x D x H) | Varies by model |
| Weight | Varies by model |
To Next Page