How to get rid of algae in my EXIT Toys Lighting Equipment pool?
If algae is present in your EXIT Toys Lighting Equipment pool, apply a 'shock' treatment (super-chlorinator). Also, check the pH and adjust it to an appropriate level, as advised by your local pool supply retailer. Vacuum or lightly scrub the pool liner, and test the water frequently to maintain proper chlorine levels.
Why is the water level persistently low in my EXIT Toys Lighting Equipment pool?
If you notice a persistent low water level in your EXIT Toys Lighting Equipment pool, check for a tear or hole in the pool liner and repair it with the included patch kit. Inspect the filter pump hose for tears or holes and repair or replace the hoses if needed. Ensure all hose clamps are tightened. Also, remember that evaporation from high summer temperatures can lower the water level, so keep the pool covered when not in use.
Why is the water in my EXIT Toys Round Frame Pool Dome 10ft Lighting Equipment colored?
If the water in your EXIT Toys Lighting Equipment is colored, it may be due to chlorine oxidizing minerals. Adjust the pH to the recommended level. Also, run the filter until the water is clear and regularly clean the cartridge.
What to do if there are particles suspended in EXIT Toys Round Frame Pool Dome 10ft water?
If you observe particles suspended in the water of your EXIT Toys Lighting Equipment, it might be due to 'hard water' caused by an elevated pH; adjust the pH accordingly. Consult a swimming pool supply retailer for the correct water treatment. Ensure the chlorine level is proper, and clean or replace your filter. Spray off any dirt with a high-pressure hose before entering the pool.
Why is my EXIT Toys Round Frame Pool Dome 10ft Lighting Equipment pool water cool?
If the water in your EXIT Toys Lighting Equipment pool is cool, it could be because the pool was set up in an excessively shady area. Relocate the pool to a more open location with maximum sunlight exposure during peak daylight hours. Also, heat can escape from the pool water, so keep your pool covered whenever it is not in use.
Specifies which pool sizes the enclosure fits.
Lists all components included with the pool enclosure for assembly.
Welcomes the user and highlights product benefits and company values.
Emphasizes reading, understanding, and following all instructions.
Guides on care, checking parts, and operating safely in windy conditions.
Outlines warranty coverage, exclusions, and claim procedures.
General| Brand | EXIT Toys |
|---|---|
| Model | Round Frame Pool Dome 10ft |
| Category | Lighting Equipment |
| Language | English |
To Next Page