How to get rid of algae in my EXIT Toys Lighting Equipment pool?
If algae is present in your EXIT Toys Lighting Equipment pool, apply a 'shock' treatment (super-chlorinator). Also, check the pH and adjust it to an appropriate level, as advised by your local pool supply retailer. Vacuum or lightly scrub the pool liner, and test the water frequently to maintain proper chlorine levels.
Why is the water level persistently low in my EXIT Toys Round Frame Pool Dome 12ft pool?
If you notice a persistent low water level in your EXIT Toys Lighting Equipment pool, check for a tear or hole in the pool liner and repair it with the included patch kit. Inspect the filter pump hose for tears or holes and repair or replace the hoses if needed. Ensure all hose clamps are tightened. Also, remember that evaporation from high summer temperatures can lower the water level, so keep the pool covered when not in use.
Why is the water in my EXIT Toys Lighting Equipment colored?
If the water in your EXIT Toys Lighting Equipment is colored, it may be due to chlorine oxidizing minerals. Adjust the pH to the recommended level. Also, run the filter until the water is clear and regularly clean the cartridge.
What to do if there are particles suspended in EXIT Toys Lighting Equipment water?
If you observe particles suspended in the water of your EXIT Toys Lighting Equipment, it might be due to 'hard water' caused by an elevated pH; adjust the pH accordingly. Consult a swimming pool supply retailer for the correct water treatment. Ensure the chlorine level is proper, and clean or replace your filter. Spray off any dirt with a high-pressure hose before entering the pool.
Why is my EXIT Toys Round Frame Pool Dome 12ft Lighting Equipment pool water cool?
If the water in your EXIT Toys Lighting Equipment pool is cool, it could be because the pool was set up in an excessively shady area. Relocate the pool to a more open location with maximum sunlight exposure during peak daylight hours. Also, heat can escape from the pool water, so keep your pool covered whenever it is not in use.
Congratulates users on choosing the EXIT Swimming Pool Dome and highlights product philosophy.
Details critical safety guidelines for installation, use, and maintenance to prevent severe harm.
Provides guidance on regular checks, seasonal disassembly, and proper storage.
Outlines precautions for using the pool enclosure during windy conditions and general usage advice.
Explains the warranty terms, conditions, and coverage for the pool enclosure and its components.
Lists all parts required for assembly with corresponding item numbers and quantities.
Detailed instructions for assembling the pool enclosure, covering steps 1 through 13.
General| Brand | EXIT Toys |
|---|---|
| Model | Round Frame Pool Dome 12ft |
| Category | Lighting Equipment |
| Language | English |
To Next Page