Exit 12FTX30IN User Manual (English)

Questions and Answers:

K
Kathy ParkerJul 29, 2025
What to do if Exit Swimming Pool has persistent low water level?
- K
  Katherine HillJul 29, 2025
  If your Exit Swimming Pool experiences a persistent low water level, several factors could be the cause. First, inspect the pool liner for any tears or holes and repair them with the included patch kit. Also, check the filter pump hoses for tears or holes, repairing or replacing them as necessary. Ensure all hose clamps are tightened. Finally, evaporation due to high summer temperatures can also lower the water level; keep the pool covered when not in use.
C
Christopher WilsonAug 4, 2025
How to get rid of algae in Exit 12FTX30IN?
- W
  whitemelissaAug 4, 2025
  If algae is present in your Exit Swimming Pool, apply a “shock” treatment (super-chlorinator). Also you can vacuum or lightly scrub pool liner. Test water often to maintain proper chlorine levels. Check pH and adjust to an appropriate level per your local pool supply retailer.
J
Jason LawsonAug 11, 2025
Why there are particles suspended in water in Exit 12FTX30IN Swimming Pool?
- P
  pvegaAug 11, 2025
  Particles suspended in the water of your Exit Swimming Pool can be due to several reasons. “Hard Water” caused by an elevated pH is one potential cause, so adjust the pH accordingly. Also ensure proper chlorine level. Clean or replace your filter. You can spray off dirt with a high-pressure hose before entry. For correct water treatment check with a swimming pool supply retailer.
G
Gregory RogersAug 16, 2025
How to fix colored water in Exit Swimming Pool?
- L
  Laura CoxAug 16, 2025
  If the water in your Exit Swimming Pool is colored, it could be due to the chlorine oxidizing minerals in your water, which commonly occurs with water from different sources. Adjust the pH to the recommended level. Run the filter until the water is clear, and regularly clean the cartridge.