10
MSP-30103-V02
Guide 4. A ground cloth will help protect the pool liner from damage due to weed
growth, sharp objects, and debris.
Guide 5. If at all possible, choose an open location on your property that is exposed
to direct sunlight. This will help to warm your pool.
5.0 Set up the pool
IMPORTANT:Do not start assembly if any pieces are missing. For replacement
pieces call the Consumer Service telephone number in your area.
The number of persons required for installation: 2 adult at least.
Total installation time except the time for site preparation and water lling:
30 up to 45 minutes.
Step 1. Account for all parts.
Remove all the parts from the carton(s) and place them on the ground in the location
where they are to be assembled
Check each part according to “PART REFERENCE” 1.0. Make sure all the pieces to be
assembled are accounted for.
Step 2. Install drain valves cover and stopper.
Make sure that outer drain plug is inserted into the outer drain cap and drain valve
cover is screwed on tightly.Plug the connection holes with the stoppers. (The out
drain plug changes according to different size of pool.)
STOPPER Out Drain Plug A Out Drain Plug BDrain Vavle Cover
+3°
Bumpy,Sloping Ground-INCORRECT
Flat,Level Ground-CORRECT
To Next Page
Loading...