Exit InTerra - Page 17

17
InTerra
Trampolines
STEP 6
Insert the leg extension(3) into the
leg secure with the spring ball as
shown.
- mat and springs not shown -
STEP 7
Place your trampoline on the ground
and make sure the center of the
mat and pit are aligned, then sign
four points (A,B,CD) on the ground
where the leg extension(3) touch the
ground. then remove your trampo-
line.
Beat the Leg Sleeve(9) into the
ground from A,B,C,D as shown. then
place the trampoline above the pit
and insert the leg extension(3) into
the Leg sleeve(9).
Caution: Do not use the trampo-
line without the Frame Pad (8).
The Frame Pad is designed to
reduce the possibility of injuries
due to jumpers coming in contact
with the trampoline frame. If you
do not have a Frame Pad, contact
your dealer to obtain one. Prop-
erly install the Frame Pad before
using the trampoline.
6
3
3
3
3
7
A
B
9
C
D
9
3
ground
ground
3
Pit
25cm
D2
Size InTerra D2
ø8ft
ø10ft
ø12ft
ø14ft
(ø244cm)
(ø305cm)
(ø366cm)
(ø427cm)
min. 85cm
min. 90cm
min. 92cm
min. 95cm