Exodus RIVAL - Trigger, Time, and IR Settings

13
Time Format
12 HR AM/PM
24 HR Military format
Trigger Delay
The amount of time after the camera completes a trigger event
and then becomes active to detect activity. Programmable up
to 59 minutes and 59 seconds. When in real time uploads the
min trigger delay is 15 seconds to most consistent performance.
Trigger Sensitivity
The Rival offers different PIR sensitivity levels to allow each user
to ne tune the specic setup for the most practical use cases
with the highest setting reaching out to 72’. Values range from
0 to 9. 0=Off to 9= Max distance
IR Flash Range
High = 90’
Low = 65’
Operating Hours
When checked/turned ON, operating hours allow the user to
specify the time of day the camera is actively being triggered.
Start time will be the time when the camera becomes active to
trigger.
Stop time will be the time when the camera goes inactive and
dormant.
Timestamp
When check/turned ON, the timestamp and data bar will be
shown on all photos and videos