15
*Never power your camera off during an update. If the camera
loses power during any FW update it will cause damage to the
device and need to be sent in for a non RMA repair.
OTA
Open your mobile app
Select the desired camera from the Cameras page
Click Actions and select Update Firmware
The Rival System Status LED will blink red during the FW
update.
*To use OTA FW updates the camera must be powered to
Online, active, and connected to the network. This will count
against your data plan with FW les typically ranging from
8-12MB
Manual
On Camera Update
For FW updates via SD card please follow the steps below:
Go to https://exodusoutdoorgear.com/pages/rmware-updates
Select the Exodus Rival A
Follow the provided instructions
How To Update FW
Learn more about the Exodus Rival with specific
tutorial videos found here
To Next Page
Loading...