Need help?Do you have a question about the Exor eTOP306 and is the answer not in the manual?
Covers radiated disturbance, electrostatic discharge, and RF field immunity tests.
Outlines the steps for correctly installing the operator panel using fixing brackets.
Details standard and emergency procedures for calibrating the touchscreen interface.
Provides steps to switch to Configuration Mode if start-up fails.
Covers radiated disturbance, electrostatic discharge, and RF field immunity tests.
Outlines the steps for correctly installing the operator panel using fixing brackets.
Details standard and emergency procedures for calibrating the touchscreen interface.
Provides steps to switch to Configuration Mode if start-up fails.
General| Touch Technology | Resistive |
|---|---|
| Processor | ARM Cortex-A8 |
| Power Supply | 24 VDC |
| Ethernet | 10/100 Mbps |
| Enclosure | Plastic |
| Display Type | TFT LCD |
| Operating System | Linux |
| Storage | 512 MB Flash |
| Serial Ports | 2x RS-232/RS-485 |
| USB | 1x USB 2.0 |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP65 |
To Next Page
