The device described in this manual is the EXOST XTREME BUSTER, a remote-controlled vehicle. It is designed for users aged 5 years and older.
Function Description
The EXOST XTREME BUSTER is a versatile remote-controlled vehicle capable of performing various maneuvers. It can move forwards and backwards, turn left and right, and features a unique "switch" function that allows it to transform its driving orientation. This transformation enables different driving styles and obstacle navigation. The vehicle is controlled via a dedicated transmitter.
Important Technical Specifications
Vehicle Power:
- The vehicle is powered by a Li-ion 3.7V / 5W / 90mAh battery. This battery is rechargeable.
Transmitter Power:
- The transmitter requires 4 x 1.5V "AA" batteries.
Frequency:
- The device operates on a 2.4 GHz radio frequency.
- Maximum radio frequency power: < 10 mW.
Range:
- The effective range between the transmitter and the vehicle is approximately 25 meters.
- If the distance exceeds 25 meters, the vehicle may not respond correctly or may experience interference.
Operating Temperature:
- The recommended operating temperature is 5 - 35 °C.
Battery Types (General Recommendations):
- Non-rechargeable batteries: Do not attempt to recharge non-rechargeable batteries.
- Rechargeable batteries: Rechargeable batteries must be removed from the toy before charging. Rechargeable batteries should only be charged under adult supervision.
- Mixing batteries: Do not mix different types of batteries (e.g., alkaline with rechargeable) or new and used batteries.
- Polarity: Batteries must be inserted with the correct polarity (+ and -).
- Short circuit: Do not short-circuit the battery terminals.
- Disposal: Exhausted batteries must be removed from the toy. Dispose of batteries and electronic components responsibly according to local regulations. The product bears the WEEE symbol, indicating that it should not be disposed of with household waste.
Usage Features
Battery Installation:
- Transmitter: Open the battery compartment on the back of the transmitter. Insert 4 x 1.5V "AA" batteries, ensuring correct polarity. Close the compartment cover.
- Vehicle: The vehicle uses a rechargeable Li-ion 3.7V / 5W / 90mAh battery. The battery compartment is located on the underside of the vehicle. Insert the battery and secure the cover.
Power ON/OFF:
- Ensure the ON/OFF switch on both the transmitter and the vehicle is in the "ON" position before operation.
Driving Controls:
- Forward/Backward: Push the throttle lever on the transmitter forwards or backwards to move the vehicle.
- Turning: To turn the vehicle left or right, press the steering lever to the left or right. The vehicle can also turn by moving the steering wheel or moving the 2 levers in opposite directions to turn.
- Stopping: To stop the vehicle, release the throttle lever.
Transformation ("Switch") Feature:
- The vehicle has a unique transformation capability. By manipulating the controls, the vehicle can change its driving orientation, allowing it to drive in different configurations. This "switch" function is illustrated in the manual, showing how the vehicle can flip or reorient itself to tackle different terrains or obstacles.
Troubleshooting:
- No power: Ensure the vehicle power is on. Check that batteries in both the transmitter and vehicle are sufficiently charged and correctly inserted with the correct polarity.
- Interference/Poor control: If the distance between the transmitter and vehicle exceeds 25 meters, or if there are other 2.4 GHz devices nearby, interference may occur. Move to another location or try again after a while.
- Steering adjustment: If the vehicle tends to drift to the left or right on its own, use the trimmer (located beneath the car) to adjust the steering.
Maintenance Features
General Care:
- Always ensure the power is off when not in use.
- Keep the toy away from direct sources of heat, water, and moisture.
- Do not immerse the toy in water, as this could damage electronic components.
- Clean the toy with a soft, dry cloth. Avoid using harsh chemicals or solvents.
Battery Maintenance:
- Remove batteries from the transmitter if the toy will not be used for a long period.
- For rechargeable batteries, follow the manufacturer's instructions for charging and storage.
- Regularly check battery compartments for any signs of corrosion or damage.
Product Longevity:
- To ensure optimal performance and longevity, use only new alkaline batteries for the transmitter.
- Regularly check the connection points and wires for any damage.
- If the product malfunctions or shows unusual behavior, discontinue use and consult the troubleshooting guide or contact customer support.
Environmental Considerations:
- The product and its batteries should be disposed of responsibly at designated collection points to protect the environment. Do not dispose of with household waste.
Need help?
General
To Next Page
