EasyManua.ls Logo

Exotek Instruments MC-380XCA User Manual

Exotek Instruments MC-380XCA
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENGFRADEUSUOPYCSVENOR
MC-380XCA
Electronic Moisture Meter
for Wood & Building Material
with RH Presentation
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Exotek Instruments MC-380XCA and is the answer not in the manual?

Exotek Instruments MC-380XCA Specifications

General IconGeneral
BrandExotek Instruments
ModelMC-380XCA
CategoryMeasuring Instruments
LanguageEnglish

Summary

Introduction to MC-380XCA Moisture Meter

Switch-On Procedure

Turns the device on by pressing a key once when it is off.

Switch-Off Procedure

Turns the device off by pressing a key once when it is on, or automatically after 30 seconds.

Alarm Functionality

Activates an acoustic alarm when a user-selectable threshold is reached or exceeded.

Battery Installation Guide

Instructions for opening the lid, installing a 9V battery, and closing the lid.

Sensor Switching and Environmental Considerations

Environmental Protection and Battery Disposal

Regulations for battery disposal and not allowing household waste disposal.

EU Country Waste Disposal Guidelines

Guidance on not disposing of electrical tools with household waste in EU countries.

Backlight Operation

The backlight dims down automatically after 5 seconds of inactivity for battery life.

Selecting Material Groups

Instructions for selecting wood and building material groups based on density or code.

Measuring with Spring Electrodes

Measuring with Integrated Bottom Sensor

Selecting Measuring Functions

F1: Measurement without hold function

Continuous measurement while scanning for fast area assessment.

F2: Measurement with hold function

Single measurement captured and held on display after contact.

F3: Relative Humidity Measurement

Calculates measured value into Relative Humidity (RH) for building materials.

F4: Measurement Averaging

Stores up to 16 measurements and calculates the average value.

Tips for Measuring Thin Materials

Base Material Considerations for Measurement

Measuring Wet Surfaces

Approximate Reference Moisture Values

Reference Measurement Guide

Guide on how to perform reference measurements to locate moisture and leakage.

Technical Specifications

Wood Group Table

Related product manuals