Need help?Do you have a question about the Exotek Instruments MC-60CPA and is the answer not in the manual?
General| Accuracy | ±0.5% FS |
|---|---|
| Output | 4-20 mA |
| Power Supply | 12-30 VDC |
| Process Connection | 1/4" NPT |
| Electrical Connection | DIN 43650 |
| Operating Temperature | -20 to 85°C |
| Housing Material | Stainless Steel |
| Diaphragm Material | Stainless Steel 316L |
Turns the device on or off and freezes the measurement value on the display.
Alerts the user with an acoustic signal when a set moisture threshold is exceeded.
Guide on how to open the battery compartment and install a 9V battery.
Regulations for battery disposal and returning batteries to collection points.
Guidelines for disposing of electrical tools in EU countries according to directive 2002/96/EC.
Selection guide for paper (P1-P6) and cardboard (C1-C6) groups based on weight and thickness.
Steps for zero-correction, holding the device, and ensuring good contact with the material.
Considerations for taking measurements on paper, avoiding air gaps and electrostatic discharge.
Automatic dimming and reactivation of the backlight to conserve battery life.
Tips for measuring materials thinner than 10mm, suggesting pile measurements for accuracy.
Importance of the base material and using PVC foil for wet surfaces.
Procedure to establish a reference value for locating wet spots and leakage.
Details on measuring method, ranges, accuracy, power, dimensions, and warranty.
To Next Page
