13
Parts / Hardware Required:
• (Hardware A) x1
• Wheel Axle (Part #14) x1
• Wheel (Part #13) x2
Installation:
• Upright grill with help from an
additional person.
• Insert Wheel Axle (Part #14)
through Wheel (Part #13) and
Leg (Part #15), Leg (Part #16).
• Place R Pin (Hardware A) onto
Wheel Axle.
Hardware Required:
• (Hardware B) x2
Installation:
• Open the Hood
• Lock Right Rear Leg (Part
#16) and Right Front Leg
(Part #15).
• Use 2 screws (Hardware B).
To Next Page
Loading...
