EXPERT GRILL Concord - Expert Grill Concord Model Description; Grill Specifications and Features; Hardware Components List; Required Assembly Tools

Hardware
Tools Required for Assembly
Philips Head Screwdriver (not included)
X30
A B
C
X8
D
X4
X1
E
X2
Expert Grill Concord Model Description
The rated power of each main grill is 11000BTU;
Grill burners are not installed with cross-illumination channels between each adjacent burner;
All burners are operated by separate plug-type gas valves;
All burner controls are installed in the control panel of the appliance. The control valve is operated
by a coated plastic control knob. The upper cover is connected to the stainless handle with rubber
sleeve by two Bakelite brackets;
The cooking surface is an iron plate (SPHC);
The grill is equipped with an aluminum-plated mild steel heat shield to isolate the heat between the
combustion chamber and the control panel;
There is a cylinder hook on the left side of the mobile device, and only 20-pound refillable cylinders
can be used. The diameter of the LP gas cylinder is about 12-1 / 4 inches, and the height is 17-15
/ 6 inches.
On the right side of the mobile device is the pellet furnace section.
6