Exploranium KT-9 - Page 78

70
S
TICK
— scan control from S
TICK
device
o)
Pressing the
c
key or clicking the trigger allows you to
enter a new header and continue scanning more data
into the same file, starting from Step
g)
on page 66.
You can keep adding as many sub-sections to your file
as you like. Each will be separated by the header.
An example where this may be use is when you change
to the next core box in the hole you are scanning.
p)
Pressing the
e
key stops the program, closes the data
file on the computer and returns control to the KT-9.
70
S
TICK
— scan control from S
TICK
device
o)
Pressing the
c
key or clicking the trigger allows you to
enter a new header and continue scanning more data
into the same file, starting from Step
g)
on page 66.
You can keep adding as many sub-sections to your file
as you like. Each will be separated by the header.
An example where this may be use is when you change
to the next core box in the hole you are scanning.
p)
Pressing the
e
key stops the program, closes the data
file on the computer and returns control to the KT-9.