What to do if Explore One Aurora II Telescope image quality is bad?
If you are getting bad quality images through your Explore One Telescope, make sure that you are not observing through a glass surface, such as a window.
How to fix no picture on Explore One Aurora II?
If you're not getting any picture through your Explore One Telescope, remove the dust protection cap and sun-shield from the objective opening.
What to do if Explore One Aurora II has no focus possible?
If you cannot focus your Explore One Telescope, wait for the temperature to balance out.
Choose a suitable position for your telescope and ensure a sturdy surface and enough space for assembly.
Extend tripod legs to desired length and place on a sturdy, even surface for stability.
Mount the accessory tray and then attach the telescope tube to the mount head securely.
Insert the 26 mm or 9.7 mm eyepiece into the focuser to control magnification.
Adjust flexible shafts for fine declination and right ascension movement for precise aiming.
General| Focal Length | 700 mm |
|---|---|
| Mount Type | Altazimuth |
| Barlow Lens | 3x |
| Finderscope | 5x24 |
| Tripod | Aluminum |
| Eyepieces Included | 20mm |
To Next Page
