Explore Planet Earth SPEEDY User Manual

Selecting a Site
Before pitching your tent, find an
area that is level and can offer
moderate wind and weather
protection. Make sure the area is
clear of over-hanging branches
and debris such as twigs and
stones, as they may damage
the tent.
Pitch your SPEEDY® Tent in 3 easy steps
Pack your SPEEDY® Tent in 3 easy steps
IMPORTANT
Pegging Your Tent
First peg points A & B to secure
the tent. The tent fly is already
attached to the tent. To stabilise
the tent in windy conditions, peg
out the guide ropes attached to
points C, D, E & F.
Simply take the SPEEDY® tent
out of its carry bag
Throw it into the air and release it.
The tent will instantly pop open.
Flip the tent so that the base
faces the ground. The tent is now
ready to be pegged down and
used.
Make sure the SPEEDY® tent has
been completely unpegged. Pull
the top edges of the frame
together so they all fold and meet
at one position. Hold the position
and then stand the tent vertically.
Push the top rounded end down
and under and continue to push
the top curved end down to
create two small hoops.
Bring the two small hoops over
the top of each other to form one
single hoop. Hold the folded tent
together and place it neatly into
the carry bag.
INSTRUCTIONS

Explore Planet Earth SPEEDY Specifications

General

Brand	Explore Planet Earth
Model	SPEEDY
Category	Tent
Language	English

Summary

Important Setup Information

Selecting a Tent Pitch Site

Find a level area with moderate protection, clear of overhead branches and debris to prevent tent damage.

Pegging Your Tent Securely

Secure tent with pegs at points A & B. Use guide ropes for stability in windy conditions.

Pitching Your SPEEDY Tent

Step 1: Remove from Carry Bag

Take the SPEEDY tent out of its carry bag to begin the pitching process.

Step 2: Tent Automatically Opens

Throw the tent into the air and release it; it will instantly pop open.

Step 3: Position for Use

Flip the tent so its base faces the ground, ready for pegging and use.

Packing Your SPEEDY Tent

Step 1: Prepare Tent for Folding

Unpeg the tent, gather frame edges together, hold position, and stand it vertically.

Step 2: Create Folding Hoops

Push the top rounded and curved ends down to create two small hoops.

Step 3: Pack into Carry Bag

Overlap the two small hoops to form one, then place the folded tent into the carry bag.

Warranty Information

Warranty Terms and Consumer Rights

Details the 3-year warranty, exclusions, consumer law rights, distribution, and activation.