EasyManua.ls Logo

Explore Scientific RDC1005-CM3000 - Alarm Functions; Setting Dual Alarm Times; Turn Alarm On;Off

Explore Scientific RDC1005-CM3000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
IT
DE
EN
the display shows °C/°F.
3. Press the [
] or [ ] button to switch
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays,
(Monday to Friday / 1-5) and one alarm time
for the weekend (Saturday to Sunday / 6-7).
Alarm 1 = Weekday alarm (1-5)
Alarm 2 = Weekend alarm (6-7)
1. Press and hold [
] button, enter alarm
setting.
2. Sequence of setting: Alarm 1 (1-5) weekday
hour weekday minute Alarm 2 (6-7)
weekend hour weekend minute exit
3. During setting, the setting parameter will
flash.
4. Press [
] button once to increase by 1
or press [
] once to decrease by 1. Alter-
natively press and hold the [
] button to
change the figures rapidly.
5. Press [
] button to confirm setting and
enter to next parameter.
6. Press [
] button to turn on/off alarm.
7. Alarm will turn on automatically when alarm
setting is finished.
8. If there is no action in 20 seconds, the set-
ting will be saved and will exit the setting
mode.
TURN ON/OFF ALARM
1. Press the [
] button once to turn on/
off the alarm that is nearest in time. (1-5) or
(6-7) will ash to indicate which alarm was
activated.
How activate alarm times individually:
2. Press [
] button once to switch to alarm
mode. Monday to Friday alarm time will be
shown and (1-5) will ash.

Related product manuals