Explore Scientific WSC4009 - Manually Setting the Clock; Manual Time and Date Adjustment

9
SET THE CLOCK MANUALLY
1. Press and hold[ ]button to enter into time and
date setting.
2. The setting parameter will flash.
3. Press [ ] button once, the figure will increase 1
unit. Press and hold the [ ] button, the figures
will increase rapidly.
4. Press [ ] button once, the figure will decrease 1
unit. Press and hold the [ ] button, the figures
will decrease rapidly.
5. Press [
]
button to confirm setting and enter to
next parameter.
6. Sequence of setting: Time zone ---> 12/24h format
Hour Minute Year Calendar format (day-
month/month-day) Month Day Temperature
unit (°C/°F) DST ON/OFF(only for US) Exit
7. If there is no action in 20 seconds, the setting will be
saved and you
will exit the setting mode.
EN
IT
DE
FR
ES
mode
mode
--->
---> ---> --->
--->
--->
--->
--->
--->