4
PRODUCT OVERVIEW
1. Press [
] to activate the backlight
for 5 seconds or to activate the snooze function
to delay the alarm by 8 minutes.
2. Press and hold [ ] to enter time and date
setting mode.
3. While in setting mode, press [ ] to increase
one unit, press and hold to increase rapidly.
4. While in setting mode, press [ ] to decrease
one unit, press and hold to decrease rapidly.
5. Press [
] to toggle the display among
current, maximum and minimum recording of
temperature/humidity. Press and hold to clear
the max/min memory records.
6. Press [ ] to turn on/off the alarm.
7. Press [ ] to toggle between time and
alarm display. Press and hold to enter alarm
setting mode.
8. While in normal display mode, press [ ]*
to initiate RCC receiving. Press and hold to set
RCC on or off.
LIGHT / SNOOZE
*Radio-controlled clock function not available in every territory
To Next Page
Loading...
