Explore Scientific WSH4008 - Product Overview; Main Unit Controls

EN
IT
DE
FR
ES
NL
1
2 3 4 5 6 7
PRODUCT OVERVIEW
1.Press [ SNZ / LIGHT ] to activate the backlight
or to activate the snooze function to delay the
alarm.
2.Press [ ALARM ] to turn on/off the alarm.
3.Press [ ALERT ] to check the high/low temper-
ature. Press and hold [ ALERT ] to set the tem-
perature alert.
4.Press [ CH ] to toggle between outdoor sensor
channel 1-3. Press and hold to initiate outdoor
sensor search.
5.While in normal display mode, press [
▼/RCC ]
to select 12H or 24H, press and hold to initiate
RCC receiving. While in setting mode,
press [
▼/RCC ] to decrease one unit, press and
hold to decrease rapidly.
6.While in normal display mode, press [ ▲/CF ] to
select °C or °F . While in setting mode, press
[ ▲/CF ] to increase one unit, press and hold to
increase rapidly.
7.Press [ MODE ] to toggle between time and
alarm display.
Press and hold [ MODE ] to enter time and date
setting mode or alarm setting mode.
8.Wall Mount.
9.Battery compartment.
10.Table stand.
8
9
10
OUTDOOR SENSOR
1. Battery compartment door.
2. Battery compartment.
3. RESET button (reset all settings).
4. Channel switch.
5. Data transmission light
2
3
4
RESET
1 2 3
AAA 1.5V AAA 1.5V
5
1
3