7
Note.
Machines with the “EL MOTOR WITH THERMAL PROTECTION” sign are equipped
with a device which protects the motor from overheating.
When this device is activated, do not attempt to operate the machine: isolate the machine
from the power supply and eliminate the cause of the problem before re-starting.
Note:
In order to identify the appliance, read the code after “MATRICOLA” (serial number) on the label
applied on this manual or on the appliance itself and select the corresponding voltage.
i
DESCRIPTION PULSE 65
PULSE 75
HIGH SPEED
Voltage (V) 220/240 110/120 220/240 110/120
Frequency (Hz) 50/60 60 50/60 60
Current (A) _ _ 4 _ _ 6,2
Power consumption (W) 350 900
Motor power (W)* 246 250
RPM
1290 1650 1400 1700
Productivity (g/s) 2,7/3,7 4,5/5,5
Weight when empty (kg) 11,5 11,5
(*) The value given is for the actual revolutions of the grinding discs.
i
Any responsibility deriving from
components manufactured and installed
on the machine shall be assumed by the
respective manufacturers; responsibility
attributable to the persons authorized
to use the machine shall be assumed by
the customer.
The machine is designed for 24-hour
intermittent service. The machine
components are designed and built to
ensure at least 1000 hours’ operation.
Good cleaning and maintenance also
contribute to ensure long machine life.
NOTIFICATIONS
To Next Page
Loading...