Exposure Lights BLAZE User Manual

CHARGING
LIGHT OPERATION & BATTERY LIFE
USER GUIDE
BLAZE
Fully Charge your light before rst use.
Locate the charge port on top of the light by lifting the silicone top cap.
IMPORTANT: After charging is complete correctly replace the top-cap to prevent water ingress.
Fully insert the USB Top-Up Cable and
begin charging from a USB supply.
An LED behind the Function Button will
ash green to indicate that it is charging
and then turn solid green when the light
is 95% charged, the remaining 5% is a
trickle charge.
Approximate charge time from a
500 mA supply is 4 hours.
To turn the light on press the function button twice in quick
succession.
The light will turn on in the mode that was last used. A single
press of the function button will cycle between a constant
beam and a pulse.
To turn the light off hold the function button down until there is
a double ash and then release.
The Function Button also displays mode and battery life. When
you turn the light on or change to another mode the Function
Button will glow amber for Pulse Mode and green for Constant
for 2 seconds, thereafter the Function Button becomes the
Fuel Gauge and indicates battery life remaining.
NOTE: When the battery has only 5% charge remaining the
light will automatically switch to the low ash setting and the
Function Button will ash red.
Function Button
Charge Port
Fuel Gauge
LED COLOUR BATTERY %
GREEN 100 - 80
AMBER 80 - 25
RED 25 - 5
RED FLASH 5 - EMPTY

Exposure Lights BLAZE Specifications

General

Recharge Time	4 hours
Water Resistance	IP67
Mounting	Handlebar
Battery Type	Lithium-Ion
Battery	Lithium-ion

Summary

Charging Your Light

Charge Port and Connection

Locate the charge port, insert USB cable, and observe charging indicator LED.

Charging Time and Safety

Approximate 4-hour charge time; ensure top-cap is replaced correctly after charging.

Light Operation and Battery Life

Turning On, Off, and Mode Cycling

Double press to turn on, hold to turn off, single press to cycle beam modes.

Battery Level Indicator

Function button color indicates battery life (Green, Amber, Red, Red Flash).

Seatpost Mounting Instructions

Attaching the Light

Securely click the Blaze into place on the seatpost bracket.

Mounting Orientation Warning

Ensure correct orientation so the lens shines directly backward.

Light Modes and Customization

DayBright Mode Usage

Recommended for daytime use for safety, accessed via Program 1 Flash setting.

Optimised Mode Selector (OMS)

Select burn time by choosing between three programs (High, Medium, Low).

Program Selection Process

Select programs by pressing and releasing the function button after specific flashes.

Maintenance and Service Information

Regular Inspection and Cleaning

Inspect light and bracket before rides, clean gently to avoid scratches.

Storage and Battery Health

Recharge monthly for extended storage; avoid prolonged periods with no charge.

Contacting Service for Issues

Contact service team before returning products for issues or repairs.

Warranty Coverage

All lights come with a 2-year warranty.