9
OLAS T2
OLAS T2 SPECIFICATION
OLAS T2 SETUP GUIDE
The OLAS T2 is a rechargeable tag which is tracked by the OLAS N2K. It transmits a Bluetooth Low Energy
signal which is received by the OLAS N2K. When the OLAS N2K loses the OLAS T2 signal the alarm is
activated. Signal will be lost when the OLAS T2 goes out of range of the OLAS N2K due to distance or
submersion in water. The OLAS T2 does not transmit GPS location.
Runtime: 7 Days.
Charge Time: 2 Hours.
Input supply: 5V - 0.5A.
Switching ON the OLAS T2 - Press the button two times:
• The OLAS T2 will vibrate twice and the LED illuminates blue for 3 seconds.
Check OLAS T2 Status – Press the button once:
• No LED light or vibration means that the OLAS T2 is OFF.
• A blue LED for 2 seconds and 2 vibrations means the OLAS T2 is transmitting, and the battery is
between 50-100%.
• A red LED for 2 seconds and 1 vibration means the OLAS T2 is transmitting, and the battery is below
50%.
Automatic Low Battery Alert when below 20%.
• The OLAS T2 will vibrate for 1 second every 60 seconds.
• The LED will ash three times every 15 seconds.
It is strongly advised to charge your OLAS T2 at the next available opportunity when below 50% battery
level. When the OLAS T2 is below 20% there is a risk of false alert and immediate charging is required.
Switching OFF the OLAS T2 – Press the button three times:
The OLAS T2 will vibrate three times and the LED illuminate red for 3 seconds.
NOTE: The OLAS T2 tag can be adjusted within the OLAS mobile app to either trigger or not trigger the
overboard alert when it is switched off.
Button
Indicator Light
EXPUG31.indd 9EXPUG31.indd 9 15/05/2023 12:1815/05/2023 12:18
To Next Page
Loading...
General