Need help?Do you have a question about the Exposure OLAS N2K and is the answer not in the manual?
Lists the types of OLAS receivers available, including the N2K, Guardian, and Core.
Describes the functionality of the OLAS mobile app for MOB alarms and system control.
Guidelines and requirements for installing the OLAS N2K, including wiring and mounting.
Steps for integrating the OLAS N2K with a NMEA 2000 network.
Instructions for installing and connecting the control switch to the OLAS N2K.
How to wire signal cables to the existing kill switch for engine control.
Instructions for securely mounting the OLAS N2K hub unit to the vessel.
Visual representation of the system's electrical connections.
Technical specifications for the OLAS T2 tag, including runtime and charge time.
Step-by-step guide for setting up and operating the OLAS T2 tag.
Procedures for charging the OLAS T2 tag using a USB port.
Rapid setup instructions for the OLAS N2K system and transmitter pairing.
Guide to installing and configuring the OLAS mobile application on a smartphone.
The default mode: engine cut-off and alert activation upon transmitter loss.
Mode for alerts without engine cut-off, allowing immediate rescue.
Mode to temporarily disable alerts and tracking for specific situations.
Procedures for powering up the system or resuming operation.
How the system warns when no transmitters are detected within range.
Process for initiating tracking of a new transmitter within close range.
Process for re-tracking known transmitters within near proximity.
Tracking transmitters using the mobile application interface.
How to check tracked transmitters using the control switch.
How to check tracked transmitters using the OLAS mobile application.
Overview of fundamental mobile app functionalities like naming and status checks.
Instructions on how to pause the tracking function of the system.
Steps to power down the OLAS N2K unit completely.
How to stop tracking transmitters manually via the control switch.
How to stop tracking transmitters using the OLAS mobile application.
Information on low battery notifications for OLAS tags and system response.
System behavior and alerts during automatic recovery after transmitter loss.
Using the system as an MOB alarm when no transmitters are active.
Advanced functionalities of the mobile app, including detection and alert settings.
Adjusts the period for silent transmitter reconnection to prevent false alarms.
Sets the delay before MOB alerts and engine cut-off are activated.
Guide for setting up and using the OLAS Smart Lock feature for theft deterrence.
Details on integrating the OLAS N2K with NMEA 2000 network for MOB alerts.
Information on integrating the OLAS CONNECT accessory for additional features.
Discusses potential issues like signal blockage and mounting requirements.
Table detailing system operational sounds and light signals for status indication.
Technical specifications and performance metrics of the OLAS system.
Lists compliance and certifications for the OLAS N2K unit.
Lists compliance and certifications for the OLAS T2 tag.
Important warnings regarding modifications and warranty information.
Contact details and support information for product assistance.
Legal terms and conditions for using the OLAS wireless system.
Initial setup and system connection guidance before leaving the dock.
Best practices for using the OLAS mobile application for optimal performance.
Procedure for testing system connections and transmitter alerts before departure.
General recommendations and safety tips for MOB situations.
Legal disclaimer regarding system usage as an aid, not for navigation.
Details the extent of liability for the manufacturer and its representatives.
Information regarding patents and pending applications for OLAS systems.
To Next Page
General