Need help?Do you have a question about the Extech Instruments 382275 and is the answer not in the manual?
General| Output Voltage | 0-30V |
|---|---|
| Output Current | 0-5A |
| Input Voltage | 110V/220V AC |
| Power | 150W |
| Voltage Regulation | ≤0.01% + 3mV |
| Current Regulation | ≤0.2% + 3mA |
| Ripple and Noise | ≤1mVrms |
| Operating Temperature | 0°C to 40°C |
| Polarity | Positive and Negative |
General introduction to the Extech 382275/382276 power supply, highlighting features and applications.
Critical safety notices for operating the power supply, including avoiding water and wet hands.
Important cautions regarding grounding, environment, heat, ventilation, and cable specifications.
Identification and description of the controls, displays, and indicators on the front panel.
Identification and description of the connectors, switches, and fan on the rear panel.
Explanation of the four operating modes: Normal, Preset, Set, and Remote Control.
Details on factory-set voltage and current values for presets P1, P2, and P3.
Procedure for verifying the power supply status and functionality upon initial power-on.
Instructions for using the rotary encoder knobs for precise voltage and current adjustments.
Steps for safely connecting the power supply to the device being tested (UUT).
Method to remotely adjust output voltage using a 0-5V external voltage source.
Method to remotely adjust output voltage using a 5Kohm variable resistor.
Method to remotely adjust output current using a 0-5V external voltage source.
Method to remotely adjust output current using a 5Kohm variable resistor.
Instructions for remotely enabling and disabling the power supply output via specific ports.
Explanation of OVP, its warning display, and reset procedure.
Details on OTP, its warning, and troubleshooting steps for overheating.
Information on OLP, its function, and how to reset the warning.
Key output parameters including voltage, current, load/line regulation, and ripple.
Specifications for meter accuracy and the unit's built-in protection features.
Details on input voltage, efficiency, switching frequency, and operating conditions.
Guidelines for safely cleaning the exterior housing of the power supply.
Information on Extech's services for repair, calibration, and NIST certification.
To Next Page
