407355 Version 2.4 9/07 14
OCCUPATIONAL NOISE EXPOSURE STANDARD Window
The Occupational Noise Exposure Standard window (see diagram) is a convenient way
to automatically set up the meter’s noise survey parameters for a given country. Simply
click on the desired country and then click the SET button. It may take a minute or so for
the operation to complete.
SET MODE
The Set Mode is used to change the noise survey parameters and the Time/Date (see
diagram). Select the desired settings and press the OK button when finished. It may
take several minutes for the operation to complete.
www.burntec.com
To Next Page
Loading...
