Extech Instruments MO210 User Manual

MO210-en-GB_V2.4 7/15
2
Introduction
Thank you for selecting the Extech Model MO210. This device is shipped fully tested and calibrated
and, with proper use, will provide years of reliable service. Please visit our website (www.extech.com)
to check for the latest version of this User Guide, Product Updates, and Customer Support.
Cautions
 The electrode measurement pins are extremely sharp. Use care when handling this instrument.
Cover the pins with the protective cap when the instrument is not in use
 This device is not a toy and must not reach children’s hands. It contains hazardous objects as well
as small parts that the children could swallow. In case a child swallows any of them, please
contact a physician immediately
 Do not leave the battery and packing material lying around unattended; they can be dangerous for
children if they use them as toys
 In case the device is going to be unused for an extended period of time, remove the battery to
prevent them from draining
 Expired or damaged batteries can cause cauterization on contact with the skin. Always, therefore,
use suitable hand gloves in such cases
 See that the battery is not short-circuited. Do not throw the battery into a fire

Extech Instruments MO210 Specifications

Display

display type	Dual measurement scale LCD with bargraph metering

Measurement

measurement principle	Electrical resistance
range for wood	6 to 44%
range for building materials	0.2 to 2.4%
electrode length	9.5 mm
electrode pins	Integrated, replaceable

Power

auto power off	After approx. 15 minutes
power supply	Three (3) CR-2032 button cells

Operating Environment

operating temperature	0 to 40°C (32 to 104°F)
operating humidity	85% Relative Humidity maximum

Weight and Dimensions

dimensions	130 x 40 x 25 mm (5.1 x 1.6 x 1.0 in)
weight	108.3 g (3.82 oz)