Need help?Do you have a question about the Extech Instruments MO265 and is the answer not in the manual?
Display| display resolution | 0.1% |
|---|---|
| display type | Backlit LCD digital display and tri-color LED bargraph scale |
Measurement Specifications| accuracy pin mode | ± (5% rdg + 5 digits) |
|---|---|
| measurement principle | Electrical resistance (pins), Electromagnetic sensor (pinless) |
| range pinless | 0.0 to 99.9 %Relative |
| range pins | 6.0 to 94.8 %WME |
Power| power supply | 9V alkaline battery |
|---|---|
| low battery indication | Battery symbol displayed on LCD |
Operating Environment| operating temperature | 0 to 50[o]C (32 to 122[o]F) |
|---|---|
| operating humidity | 80% Relative Humidity maximum |
Weight and Dimensions| dimensions | 203 x 58 x 43mm (8 x 2.3 x 1.7”) |
|---|---|
| weight | 204g. (7.2 oz) |
Details the parts and components of the Extech MO265 meter.
Explains the indicators and readings shown on the meter's LCD.
Describes the tri-color LED bargraph for moisture indication.
Instructions on handling and replacing the sharp electrode pins.
Step-by-step guide for performing moisture measurements using electrode pins.
Procedure for taking non-invasive moisture readings using the pinless sensor.
Guide for using the remote probe for pin-based moisture measurements.
Steps to perform zero calibration for pinless moisture measurements.
Method to verify calibration accuracy for pin measurements.
Explains how to control LCD backlight and use the data hold function.
Details the configurable settings and options for the meter.
Instructions for replacing the 9V battery when needed.
Guidelines for cleaning, maintaining, and disposing of the instrument.
To Next Page