Extech Instruments MO265 User Manual

MO265-EU-EN-V1.0-10/10
8
Battery Replacement
If the instrument does not switch ON or displays the low battery symbol, replace the battery
as follows:
1. Slide off the rear battery compartment cover
2. Replace the 9V battery
3. Secure the battery compartment
4.
You, as the end user, are legally bound (EU Battery ordinance) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over
your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the
device at the end of its lifecycle
Maintenance
• Always keep the instrument dry
• To clean, wipe the meter with a damp cloth. Use a mild detergent if necessary but
never use abrasives or solvents.
• Prevent dirt from accumulating at the electrode pins
Specifications
Display Backlit LCD digital display and tri-color LED bargraph scale
Resolution 0.1%
Accuracy Pin mode: ± (5% rdg + 5 digits)
Pinless mode is a relative reading only
Measurement principle Electrical resistance (pins)
Electromagnetic sensor (pinless)
Range 0.0 to 99.9 %Relative (pinless)
6.0 to 94.8 %WME (pins)
Electrode pin length 11mm (0.44”)
Electrode pin type Integrated, replaceable
Power supply 9V alkaline battery
Low Battery Indication Battery symbol displayed on LCD
Meter housing Impact-proof plastic
Operating Temperature 0 to 50
o
C (32 to 122
o
F)
Operating Humidity 80% Relative Humidity maximum
Dimensions 203 x 58 x 43mm (8 x 2.3 x 1.7”); not including remote probe
Weight 204g. (7.2 oz); not including remote probe
Copyright © 2010 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.

Extech Instruments MO265 Specifications

Display

display resolution	0.1%
display type	Backlit LCD digital display and tri-color LED bargraph scale

Measurement Specifications

accuracy pin mode	± (5% rdg + 5 digits)
measurement principle	Electrical resistance (pins), Electromagnetic sensor (pinless)
range pinless	0.0 to 99.9 %Relative
range pins	6.0 to 94.8 %WME

Power

power supply	9V alkaline battery
low battery indication	Battery symbol displayed on LCD

Operating Environment

operating temperature	0 to 50[o]C (32 to 122[o]F)
operating humidity	80% Relative Humidity maximum

Weight and Dimensions

dimensions	203 x 58 x 43mm (8 x 2.3 x 1.7”)
weight	204g. (7.2 oz)