Extraflame BELLA - Page 10

10
Chapter 2
TECHNICAL FEATURES
Features U.M.
Esmeralda
Esmeralda Crystal
Clementina
Divina
Divina Steel
Divina Plus
Irina
Ecologica
Weight kg 188 178 137 175 149 190 140 159
Height mm 1011 1011 1068 1150 1150 1165 1053 955
Width mm 1249 1249 500 610 610 610 522 667
Depth mm 656 656 573 593 593 593 559 671
Diameter of fume discharge pipe mm 80 80 80 80 80 80 80 80
Diameter of air intake pipe mm 50 50 50 50 50 50 50 50
Max. heating volume m 204 204 242 242 242 242 242 237
Max. global thermal power kW 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0
Max. thermal power needed kW 8.9 8.9 10.5 10.5 10.5 10.5 10.5 10.3
- air power supply kW 8.9 8.9 10.5 10.5 10.5 10.5 10.5 10.3
- water power supply kW - - - - - - - -
Min. thermal power needed kW 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
Min. useful thermal power kW 3.5 3.5 3.4 3.4 3.4 3.4 3.4 3.4
- air power supply kW 3.5 3.5 3.4 3.4 3.4 3.4 3.4 3.4
- water power supply kW - - - - - - - -
Max. fuel combustion per hour kg/h 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5
Min. fuel consumption per hour kg/h 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8
Tank capacity kg ~ 26 ~ 26 ~ 25 ~ 30 ~ 30 ~ 30 ~ 21 ~ 35
Recommended chimney draught Pa ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10
Chimney draught at max. useful thermal power Pa 12 12 12 12 12 12 12 12
Chimney draught at min. useful thermal power Pa 10 10 10 10 10 10 10 10
Nominal electrical power W 300 300 300 300 300 400 300 300
Appliance electric power W 300 300 300 300 300 400 300 300
Nominal voltage Vac 230 230 230 230 230 230 230 230
Nominal frequency Hz 50 50 50 50 50 50 50 50
Diameter of water intake/output pipe “ - - - - - - - -
Diameter of automatic discharge pipe “ - - - - - - - -
Pump head m - - - - - - - -
Max. working water pressure allowed bar - - - - - - - -
The tank capacity depends on the type of pellet used.
Tests carried out using wooden pellets as fuel, with heating power of 4.9 kW/h/kg.
The data stated above is a reference and not binding. The manufacturer reserves the right to carry out any
modi cations in order to improve the performance of the product.
The electrical power of the appliance indicates the sum of the electrical absorption of the components
present, as per standard, inside the product. The nominal power is the maximum power value that the
appliance can absorb also considering the installation of various additional devices.