Need help?Do you have a question about the Extraflame CONTESSA and is the answer not in the manual?
General| Type | Pellet stove |
|---|---|
| Weight | 120 kg |
| Smoke outlet diameter | 80 mm |
| Flue Diameter | 80 mm |
| Efficiency | 90.0% |
| Pellet Hopper Capacity | 15 kg |
| Dimensions (H x W x D) | 1080 x 540 x 540 mm |
Details of the authorized specialist for stove support and contact information.
Guidelines for storing pellets to ensure proper combustion and prevent damage.
Safety function when the warm air blower stops unexpectedly.
Safety response when the fume exhauster fails.
Stove behavior if the pellet feed motor stops operating.
Information on what happens and what to check if the lighting process fails.
How the stove reacts to brief power interruptions and smoke emission.
Protection against power surges via a master fuse.
Safety mechanism triggered by exhaust system failure.
Device blocking operation in case of pellet hopper overheating.
Definitions of key terms related to pellet stove installation.
General installation requirements, prohibitions, and admissible conditions.
Requirements for connecting the stove's exhaust channel to the flue.
Specifications and requirements for the chimney or single flue system.
Rules for connecting the appliance to the flue.
Requirements for the chimney cap.
Guidelines for connecting external air intakes.
Safety measures regarding materials near the hearth.
Importance of complying with local laws during installation.
Specific instructions for the Divina Plus model's distributed heating.
Step-by-step guide for installing the insert using its sliding base.
Instructions for installing the insert using an optional pedestal.
Procedure for safely removing the insert for maintenance.
Steps for attaching the frames to the Comfort insert.
Requirements for creating air circulation ducts.
Explains the need for heat release to prevent insert overheating.
Describes the role of the tangential fan.
How to create an air entrance hole.
Function of the primary button for turning the stove on and off.
Buttons to adjust the desired room temperature.
Buttons for adjusting heating power and ventilation.
Explains various messages displayed on the control panel.
Fundamental guidelines for the safe and correct use of the pellet stove.
How to operate the stove during its normal functioning cycle.
Specific operational details for the Divina Plus model.
Procedure for safely shutting down the pellet stove.
How to control stove functions remotely.
How the digital thermostat regulates heating power.
Installation and operation of an optional mechanical thermostat.
Using the Standby function to reduce pellet consumption.
Controlling the heat distribution motor on Divina Plus models.
Electrical schematic for the general stove wiring.
Electrical schematic specific to the Maxi Comfort Insert.
Setting heating schedules for different times and days.
Programming different temperature settings for day and night.
Adjusting the percentage of pellet feed for optimal combustion.
Parameters for controlling the heat distribution motor.
Detailed guide to programming day/night temperature settings.
Troubleshooting and adjusting pellet feed for optimal performance.
Parameters for managing the heat distribution motor.
Specific cleaning instructions for Ecologica and Maxi Comfort Insert models.
Monthly procedure for cleaning the heat exchanger chamber.
Checking and replacing seals.
Cleaning procedures for Bella, Contessa, Divina, and Duchessa models.
Monthly procedure for cleaning the heat exchanger chamber.
Checking and replacing seals.
Cleaning instructions for Babyfiamma, Preziosa, Karolina, and Isabella models.
Monthly procedure for cleaning the heat exchanger chamber.
Checking and replacing seals.
Cleaning procedures for Falò models.
Checking and replacing seals.
Information about the burn pot partition.
Guidance on cleaning the chimney connection.
Terms and conditions under which the product warranty is valid.
Requirements for warranty activation, including registration and installation.
To Next Page
