ROUTINE MAINTENANCE
THE IMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY.
A
Fumes motor (disassembly and cleaning and fumes and "T" pipes), new silicone or gasket in the points indicated.
B
Gaskets, pellet hopper and door (replace them and apply silicone where required)
C
Combustion chamber and heat exchanger (full cleaning) including ignition-plug pipe
D
Hopper (complete emptying and cleaning) and check gasket.
E
Check the air intake pipe and check/clean the mechanical pressure switch
F
Room air fan disassembly and removal of dust and pellet debris.
To Next Page
Loading...
Need help?
General
