Extraflame TERMOPELLET TP30 - Page 23

CHRONO SET MENU
23
Chapter 6
START PROGRAM 3
Set at “OFF” using buttons 4(-) or 5(+), which is found before the time “00:00”, in a way to disable the
switch-on of the 3rd time span.
To con rm and continue programming, press button 3 (menu/ok).
Press button 2 (set) to go back to the previous parameter.
STOP PROGRAM 3
Set at “OFF” using buttons 4(-) or 5(+), which is found before the time “00:00”, in a way to disable the
switch-o of the 3rd time span.
To con rm and continue programming, press button 3 (menu/ok).
Press button 2 (set) to go back to the previous parameter.
DAYS ON 3
At this point the values introduced in this parameter have no value as the ignition and switch-o of the 3rd
time span have been disabled.
Press button 1(esc) to con rm and escape the programming.
Press button 2 (set) to go back to the previous parameter.