Need help?Do you have a question about the Extraflame LP30 and is the answer not in the manual?
General| Type | Pellet boiler |
|---|---|
| Fuel | Pellets |
| Weight | 320 kg |
| Power supply | 230 V - 50 Hz |
| Max. water temperature | 80°C |
| Min. water temperature | 40°C |
| Working pressure | 3 bar |
| Pellet consumption | 6.5 kg/h |
| Flue gas temperature | 160 °C |
| Efficiency | >92 % |
Instructions for removing the burn pot bracket before ignition.
Lists safety devices not integrated into closed vessel systems.
Guidelines for proper installation and safety devices compliance.
Required safety devices for closed vessel systems per standard.
Specifies required distances for safety device placement.
Specifies acceptable locations and conditions for installation.
Lists conditions and items that must not be present during installation.
Details on connecting the appliance to the smoke evacuation system.
Requirements for smoke channels and fittings for exhaust.
Specifications for chimneys and individual flues for proper exhaust.
Recommended clearances around the boiler compartment.
Connecting the appliance to the flue for safe exhaust.
Requirements for the chimney cap to ensure proper ventilation.
Guidelines for connecting external air inlets for combustion.
Recommendations for insulation, coverings, and safety.
Compliance with local installation regulations and standards.
Description of the control panel buttons and displays.
Explanation of icons displayed on the control panel.
Initial recommendations for operating the stove.
Procedure and precautions for igniting the appliance.
Description of the normal working phase and modulation.
Explanation of the pump's operation and recommendations.
Methods for switching off the appliance.
How the additional thermostat works with STBY mode.
Steps for installing an additional thermostat.
Setting the boiler water temperature.
Activating Chrono and regulating pellet flow.
Displaying the current status of the boiler.
Accessing user settings like clock, language, and chrono.
Adjusting the boiler water temperature via the menu.
Adjusting the operating power of the boiler.
Overview of user regulation options.
Switching between automatic and manual operating modes.
Adjusting the pellet feed percentage.
Viewing the status of inputs and outputs.
Accessing user-specific settings.
Setting the current time and date.
Programming timed ignition and switch-off periods.
Selecting the display language for the menu.
Programming the heat exchanger cleaning times.
Procedure for cleaning the burn pot.
Checking and maintaining door gaskets and ash drawers.
Connecting to and cleaning the flue system.
Cleaning procedure for the Lucrezia Idro burn pot.
Steps for cleaning the smoke deflector.
Procedure for emptying and cleaning the ash drawer.
Checking and maintaining door gaskets and ash drawers.
Specifies the geographical validity of the warranty.
Conditions required for the warranty to be valid.
Process for requesting warranty service.
Limitation of the manufacturer's liability.
Designation of the competent court for disputes.
To Next Page
