Extreme Networks Extreme Wireless WSAP3825i - Page 11

Figure 4: WS-AP3825 LEDs (Front, lower right)
1
AP status 4 Radio 2 status (2.4 GHz)
2 LAN 1 (Ethernet 1) link state 5 Radio 1 status (5 GHz)
3 LAN 2 (Ethernet 2) link state
Table 3: WS-AP3825 LED Indications
LED Status Description
1 (AP status) On Green Indicates the WS-AP3825 is working
normally.
Flashing Green Indicates:
•
running a self test
•
loading software program
On Amber Indicates a CPU/system failure.
2 (Ethernet link state) LAN 1 On Green Indicates a valid 100Mbps Ethernet
link.
On Amber Indicates a valid 1Gbps Ethernet link.
O Indicates the link is down.
Introduction
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version . 11