A Specifications
External Power Supplies
Internal Antenna Access Points
External Antennas
This appendix lists the specifications for the WS-AP3825i and WS-AP3825e access points and an
external 12V DC power supply.
Table 5: Specifications for the WS-AP3825i and WS-AP3825e
Item Specification
Enclosure material Metal base, plastic housing
Power source 802.3af compliant PoE PD,
12V DC input
Power consumption < 12.94W (Max.)
Outside dimensions (max) WS-AP3825e Length: 190.5mm (7.5")
Width: 145mm to 180.0mm (7.5" to 7.09")
Thickness (not including mounting bracket): 29mm
(1.13") to 38mm (1.5").
Antenna (WS-AP3825i only) 6x internal antennas, single band
Uplink Interface GbE Ethernet x1 with PoE
RoHS compliant Yes
Radio Configuration IEEE 802.11ac, a/b/g/n
2.4/5 GHz single-band,
Dual-radio, 3x3:3 MIMO
Operating temperature 32°F to 122°F (0°C to +50°C)
External Power Supplies
WS-AP3825 APs may be powered by IEEE 802.3af compliant PoE cables connected to the Ethernet
ports in the connector bay. This is usually the preferred method of powering for users that plan to
mount the devices on ceilings or high up on walls. You can also power these APs with optional external
power supplies.
Table 6: Universal Specifications for an External Power Supply
Item Specification
Enclosure material Plastic housing
AC Input 100-240V
DC output 12V
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version . 30
To Next Page
Loading...
