Configuring Radio Transmit (Tx) Power
Based on the configured mode, channel, channel plan, and channel width for the specific antenna, the
professional installer must enter the corresponding Transmit Power (Tx Power) for the desired Radio
using the ExtremeWireless Assistant.
1 Log into the Wireless Assistant.
2 From the top menu, click AP.
The Wireless AP screen displays.
3 Click the AP button in the left pane, then in the Wireless AP list, select the Wireless AP whose
properties you want to modify.
The AP Properties tab displays Wireless AP information.
4 Click the Radio 1 tab.
Max Tx Power is automatically determined based on regulatory domain/country, antenna selected,
line attenuation configured, channel, and certification testing.
5 Professional installer is responsible for accurately configuring port Attenuation. In no case, port
attenuation should be configured higher than actual attenuation between the AP port and the
antenna.
6 Repeat the process for Radio 2.
Installation
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version . 29
To Next Page
Loading...
